• 827 Oyster Park Drive, Ste A
  • Edisto Island, SC 29438

Water Filtration Systems

Industrial and Commercial Water Filtration Systems

Industrial Water Filtration - MFG SeriesIndustrial Water Filtration 

For use with any of the filter technologies listed below. Designed for smaller applications under 40-GPM per filter vessel but can be configured in multi-tank parallel systems for higher flow rates. Limited to tank diameters up to 36″ and service pipe connections up to 2″ NPT.
Features/Benefits

  • Fiberglass reinforced polyester (FRP) pressure vessels for 150 psi working pressure.
  • Brass, top mounted multi-port control valves.
  • Integral timeclock controller for automatic backwash/rinse cycles.
  • Self-adjusting flow control to maintain accurate backwash rates.
  • Internal distribution system for minimal pressure drop and proper backwashing.

Commercial Filtration Systems - MFS SeriesCommercial Filtration Systems –¬†

For use with any of the filter technologies listed below. Designed for larger commercial and industrial applications with multi-tank parallel systems common for high flow rates. Tank diameters up to 144″ and service pipe connections to 8″ flange are available.
Features/Benefits

  • Epoxy lined and prime exterior finished carbon steel pressure vessels. Non-ASME construction with 100 psig working pressure.
  • Galvanized steel face-piping assembly with cast iron, normally-open, “Y” pattern diaphragm control valves. Filters with service piping 6″ and larger utilize flanged carbon steel face-piping and double-acting butterfly control valves.
  • Pilot stager valve controller for automatic backwash operation. Pre-wired in a NEMA-12 enclosure with an adjustable time-clock for backwash initiation.
  • Self-adjusting flow control to maintain accurate backwash rates.
  • PVC media-retaining under-drain distribution system in either hub-radial or header-lateral configurations for minimal pressure drop and proper back-washing.