• 827 Oyster Park Drive, Ste A
  • Edisto Island, SC 29438

Traditional Water Softener

Watts Series HC-200 and HCTA-200

These water softeners are suitable for commercial applications
ranging from 90,000 to 600,000 grains of
hardness removal capacity at flow rates up to
105 gpm (397 lpm).

Operation of the Softener

Hard water contains dissolved minerals in the form of
Calcium (Ca), Magnesium (Mg), and Iron (Fe). An ion
exchange process accomplishes removal of these minerals.
As water flows through the mineral tank, the dissolved
minerals become attached to the resin. Over a period of
time, the resin will become exhausted, and the softener will
regenerate using a brine solution.

Softening Media

The exchange media is a high-quality strong acid softener
(cation) resin certified to NSF/ANSI Standard 61, with high
whole bead count, no color throw, and is chlorine resistant.
The media combines high operating capacity with excellent
chemical and physical stability for a long dependable life.

Regeneration Controller

These softeners feature an electronic controller that combines
simplicity with flexibility in a user-friendly package
that is easy to set up and operate. Multiple controllers can
be networked together, which allows a wide variety of
multi-tank systems to be configured in the field. Important
operational information is stored in the timer which can be
accessed for troubleshooting purposes.

Control Valve

The 2″ brass control valve operates on command from
the electronic valve controller. Valve positioning is accomplished
by two hydraulically balanced pistons which glide
effortlessly along non-corrosive spacers and seals to precise
locations. This precision motor driven valve performs
in the toughest applications, is certified to NSF/ANSI standard
61 and 372, and is made of high-quality brass for a
long reliable life.

Resin Tanks

All models feature non-corrosive fiberglass tanks with a
thermoplastic inner liner. All tanks are certified to NSF/ANSI
standards.

Brine System

The brine tank is made of tough, high-density polyethylene.
Brine tanks 24″ in diameter and smaller feature a grid plate
for increased brine storage. A high-quality air check prevents
air from entering the system

 

Series HC-300 andHCTA-300Water Softeners

Watts Series HC-300 and HCTA-300 water
softeners are suitable for commercial applications
ranging from 300,000 to 1,050,000 grains
of hardness removal capacity at flow rates up
to 280 gpm (1059 lpm).

 

Operation of the Softener

Hard water contains dissolved minerals in the form of
Calcium (Ca), Magnesium (Mg), and Iron (Fe). An ion
exchange process accomplishes removal of these minerals.
As water flows through the mineral tank, the dissolved
minerals become attached to the resin. Over a period of
time, the resin will become exhausted, and the softener will
regenerate using a brine solution.

Softening Media

The exchange media is a high-quality strong acid softener
(cation) resin, WQA certified to NSF/ANSI Standard 61 with
high whole bead count, no color throw, and is chlorine
resistant. The media combines high-operating capacity
with excellent chemical and physical stability for a long
dependable life.

Regeneration Controller

These softeners feature an electronic controller that combines
simplicity with flexibility in a user-friendly package
that is easy to set up and operate. Multiple controllers can
be networked together, which allows a wide variety of
multi-tank systems to be configured in the field. Important
operational information is stored in the timer which can be
accessed for troubleshooting purposes.

Control Valve

The 3” brass control valve operates on command from
the electronic valve controller. Valve positioning is accomplished
by two hydraulically balanced pistons which glide
effortlessly along non-corrosive spacers and seals to precise
locations. This precision motor driven valve performs
in the toughest applications, is WQA certified to NSF/ANSI
standard 61 and ANNEX “G”, and is made of high-quality
brass for a long reliable life.

Resin Tanks

All models feature non-corrosive fiberglass tanks with a
one-piece thermoplastic inner liner. All tanks are certified
by WQA or NSF to NSF/ANSI standards.

Brine System

The brine tank is made of tough, high-density polyethylene,
and a high-quality air check prevents air from entering the
system.